Complete Tutorial for Installing a New Shower Unit

Blog Article

Preparation

To start with, you must select the sort of shower that you wish to install. It is very important to ascertain whether the selected shower can managing certain systems as well as can control a risk-free degree of water through the boiler. Many shower systems nowadays are created to be adaptable to various water stress (such as saved warm water and also cool keys).
It is additionally vital to take into account the water pressure and also the preparation of the piping as well as drain for the shower

Different Types of Shower Units

Push-on Mixer: The hose and also spray parts of the push-on mixer shower device can be linked to the bath tap as per your need, as well as the water temperature level can be adjusted via the faucets. Push-on mixers are cheap as well as extremely basic to set up. However, although the tube link is simple, it is conveniently removed. Furthermore, it is inconvenient to adjust the temperature level.

Bath/Shower Mixer: The pipe as well as spray of this kind of shower are integrated with a bathroom mixer faucet, and the temperature level can be changed via the bath taps. It is an extremely affordable choice and also no extra plumbing is included. Nonetheless, the bath/shower mixers also deal with bothersome temperature control choices.

Handbook Mixer: The tube and spray of a hands-on mixer shower system belong of the wall system and the hot and cold water products are attached to a single shutoff The temperature level as well as pressure of the water are regulated with either one or a variety of handles (in a lot more expensive showers). Although temperature level control is much easier in hand-operated mixer kinds, they are much more expensive than the previously discussed mixers. They also call for added plumbing of cold and hot water system pipes.

Thermostatic Mixer: The pipe and also spray of this shower kind are a part of the wall unit and the hot and cold water materials are connected to a single shutoff here too. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to stop it from coming to be also hot. Among the largest advantages of a thermostatic mixer shower kind includes practical temperature level control. However, it is one of the most pricey of the different mixer options.

Power Shower: A power shower is a solitary device including a powerful electrical pump that is capable of altering both the water stress and temperature level. This kind of shower can be fitted if there is water system from a cold water cistern as well as a warm water cylinder. A power shower makes the change of both stress as well as temperature level very easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is provided by a mix central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and it heats the water electrically. It is necessary to keep in mind that for this shower kind to be installed, the keys stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system allows the temperature level as well as pressure to be readjusted through a knob. Versions with temperature level stabilisers are much better as they stay unaffected by other taps in other places being used within the household. A major disadvantage of electric showers is that the control knob only permits the option of high temperatures at much less stress, or reduced temperature levels at a higher pressure. This is troublesome in the winter season when the spray is often weak as well as the mains water is chillier. Nevertheless, this problem is tackled in some versions which are offered with a winter/summer setting.

Approach

Depending on the type of shower you desire to set up, the shower head need to either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Before beginning, it is a good idea to note the positions of the shower head and control, and also to prepare the pipe-work entailed. In addition, the drainage system to get rid of the waste water will certainly require to be intended. Both placements of the wire course and also the shower button will certainly likewise need to be thought about if an instantaneous or electrical shower unit is being set up.
Use the direction guide provided with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is important to cut off the supply of water. In order to safeguard the pipelines, they ought to be provided a water-proof covering and likewise fitted with isolating valves. The pipes can then be hidden right into the wall as well as glued over to neaten the overall appearance.
Fit the base tray, shower head, and also installations.
Connect the main shower control to the pipelines that will be supplying the water (This might call for a women screw thread adapter).
Reconnect the water supply and also test the pipelines for any type of leakages, as some might require tightening.
If you are installing an electrical shower, remember to turn off the electricity supply prior to making any kind of electrical connections. As soon as these links have actually been made (there must be assistance within the user's manual), the power supply can be switched over back on.

Readjusting Water Stress to Match Your Shower

The cold water storage tank can be raised to a better elevation (occasionally as little as 150mm (6inches)) by fitting a strong wooden support beneath it - possibly made up of struts and also blockboards. If you select this alternative, the major as well as distribution pipelines will certainly additionally need to be increased to meet the brand-new height of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it has to be linked into the power supply in order to run.

Piping and also Water drainage

It is best to use 15mm size supply pipelines, as well as make the go to the shower as short and also straight as possible so regarding keep maximum pressure and minimise heat loss. Additionally, by minimising using arm joints for pipeline corners, you can reduce the resistance in the flow of the water system. You can accomplish this by bending the pipes rather.

Most Common Blunders

Going against or overlooking regional code limitations.

Using pipelines that are as well small.

Attaching copper to galvanized without making use of a brass or dielectric suitable in between both.

Not making use of tape or pipeline substance at threaded joints.

Uneven your components when mounting them.

Not setting up an air space loading for components.

Reducing supply stub outs as well short to install the shutoff valves onto after the finished wall surface remains in location.

Not appropriately lining up tubing into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will cause a leakage.).

When turning the water back on in your home, always run the outdoors hose pipe valve or purge your toilets to hemorrhage dirt and air from the lines. This particles can cause troubles in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.
https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As an enthusiastic reader on How to Install a Direct-to-Stud Shower Enclosure, I was thinking sharing that piece of content was a great idea. Liked our post? Please share it. Let others find it. Kudos for your time. Kindly come visit our website back soon.

Book A Service

Report this page

COMPLETE TUTORIAL FOR INSTALLING A NEW SHOWER UNIT

Complete Tutorial for Installing a New Shower Unit